Rosewood Finish Wine Box with Sublimatable Lid
| Short Description: Rosewood Finish Wine Box with Sublimatable Lid |
| Long Description: Rosewood finish wine box with sublimatable hardboard lid for customization. Lid slides open and closed. Presentation box holds 1 wine bottle. |
| Length: 14 1/4" |
| Height: 3 7/8" |
| Width: 4 1/4" |
| Thickness: n/a |
| Overall Size: 14 1/4" x 4 1/4" x 3 7/8" |
| Maximum Personalization Area: 14" x 3 7/8" |
| Color: Rosewood |
| Material: MDF/Hardboard Lid |
| Gender: Neutral |
| Miscellaneous Dimensions: Inside: 13 1/4" x 3 1/2" x 3 1/4" |
| Misc. Notes |
|---|
| The lid slides into the box from the one end. Lid has a finger hole for easy sliding. Lid is 14" x 3 7/8". No tools are included. Will hold 1 standard sized wine bottle. Depth of box without lining is 3 13/16" |
SHIPPING INFO
Processing time is 2-4 business days and that does not include the shipping time frame that you choose at checkout. Shipping time is an additional time added on to the 2-4 business days processing.
PRODUCT INSTRUCTIONS
Product Instructions:
WINE BOX LID SUBLIMATIONSupplies needed:
- sublimatable substrate (lid)
- sublimation transfer
- teflon or scratch paper
- heat tape (H107)
- soft paper towelHeat press settings:
- temperature - 400 degrees F
- dwell time - 1:30 - 2 min.
- pressure - medium
Note: The recommended settings above for sublimation may need adjustments for
best results. Sublimation settings will vary depending on the heat press brand
and model ink and paper and atmospheric conditions.2nd Note: The layers of soft paper towel achieve two goals: 1. it helps to
distribute the pressure evenly throughout the substrate; 2. it helps to trap
ink that is dispersed outside of the edges of the substrate if there is an
overprint area or full bleed in the artwork.
Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. 2-3 layers of soft paper towel
3. substrate
4. transfer
5. teflon sheet or scratch paperSteps:
1. Remove the protective plastic coating if any from the substrate.
2. Use a lint-free towel to remove any loose debris from the substrate if
necessary.
3. Position the substrate onto the transfer and adhere transfer to substrate
using heat tape.
4. Place the transfer and substrate in the press onto the paper towel
(transfer on top of substrate).
5. Place the teflon sheet or scratch paper over the transfer.
6. Press the items using the sublimation settings listed above.
7. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
8. Remove transfer from substrate
Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (10-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed reduce the dwell time slightly (10-15 seconds).